vanten-s/geos
1
0
Fork 0
Code Issues Pull requests Packages Projects Releases Wiki Activity
geos/opt/share/info/sframe-spec.info

697 lines
30 KiB
Plaintext
Raw Normal View History

First version
2024-03-26 15:15:06 +01:00
This is sframe-spec.info, produced by makeinfo version 7.0.2 from
sframe-spec.texi.
Copyright © 2021-2023 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU General Public License, Version 3 or any
later version published by the Free Software Foundation. A copy of the
license is included in the section entitled “GNU General Public
License”.
INFO-DIR-SECTION Software development
START-INFO-DIR-ENTRY
* SFrame: (sframe-spec). The Simple Frame format.
END-INFO-DIR-ENTRY

File: sframe-spec.info, Node: Top, Next: Introduction, Up: (dir)
The SFrame format
*****************
This manual describes version 2 of the SFrame file format. SFrame
stands for Simple Frame format. SFrame format keeps track of the
minimal necessary information needed for generating stack traces:
− Canonical Frame Address (CFA).
− Frame Pointer (FP).
− Return Address (RA).
The reason for existence of the SFrame format is to provide a simple,
fast and low-overhead mechanism to generate stack traces.
* Menu:
* Introduction::
* SFrame section::
* Index::

File: sframe-spec.info, Node: Introduction, Next: SFrame section, Prev: Top, Up: Top
1 Introduction
**************
* Menu:
* Overview::
* Changes from Version 1 to Version 2::

File: sframe-spec.info, Node: Overview, Next: Changes from Version 1 to Version 2, Up: Introduction
1.1 Overview
============
The SFrame stack trace information is provided in a loaded section,
known as the ‘.sframe’ section. When available, the ‘.sframe’ section
appears in a new segment of its own, PT_GNU_SFRAME.
The SFrame format is currently supported only for select ABIs,
namely, AMD64 and AAPCS64.
A portion of the SFrame format follows an unaligned on-disk
representation. Some data structures, however, (namely the SFrame
header and the SFrame function descriptor entry) have elements at their
natural boundaries. All data structures are packed, unless otherwise
stated.
The contents of the SFrame section are stored in the target
endianness, i.e., in the endianness of the system on which the section
is targetted to be used. An SFrame section reader may use the magic
number in the SFrame header to identify the endianness of the SFrame
section.
Addresses in this specification are expressed in bytes.
The rest of this specification describes the current version of the
format, ‘SFRAME_VERSION_2’, in detail. Additional sections outline the
major changes made to each previously published version of the SFrame
stack trace format.
The associated API to decode, probe and encode the SFrame section,
provided via ‘libsframe’, is not accompanied here at this time. This
will be added later.
This document is intended to be in sync with the C code in
‘sframe.h’. Please report discrepancies between the two, if any.

File: sframe-spec.info, Node: Changes from Version 1 to Version 2, Prev: Overview, Up: Introduction
1.2 Changes from Version 1 to Version 2
=======================================
The following is a list of the changes made to the SFrame stack trace
format since Version 1 was published.
• SFrame Function Descriptor Entry encodes the size of the repetitive
code blocks, e.g., pltN entries for which an FDE of type
SFRAME_FDE_TYPE_PCMASK is used.
• SFrame Function Descriptor Entry includes an explicit padding of
two bytes to ensure natural alignment for its data members.
• The above two imply that each SFrame Function Descriptor Entry has
a fixed size of 20 bytes instead of its size of 17 bytes in SFrame
format version 1.

File: sframe-spec.info, Node: SFrame section, Next: Index, Prev: Introduction, Up: Top
2 SFrame section
****************
The SFrame section consists of an SFrame header, starting with a
preamble, and two other sub-sections, namely the SFrame Function
Descriptor Entry (SFrame FDE) sub-section, and the SFrame Frame Row
Entry (SFrame FRE) sub-section.
* Menu:
* SFrame Preamble::
* SFrame Header::
* SFrame Function Descriptor Entries::
* SFrame Frame Row Entries::

File: sframe-spec.info, Node: SFrame Preamble, Next: SFrame Header, Up: SFrame section
2.1 SFrame Preamble
===================
The preamble is a 32-bit packed structure; the only part of the SFrame
whose format cannot vary between versions.
typedef struct sframe_preamble
{
uint16_t sfp_magic;
uint8_t sfp_version;
uint8_t sfp_flags;
} ATTRIBUTE_PACKED sframe_preamble;
Every element of the SFrame preamble is naturally aligned.
All values are stored in the endianness of the target system for
which the SFrame section is intended. Further details:
Offset Name Description
-----------------------------------------------------------------------------------------
0x00 ‘uint16_t sfp_magic’ The magic number for SFrame section: 0xdee2. Defined
as a macro ‘SFRAME_MAGIC’.
0x02 ‘uint8_t sfp_version’ The version number of this SFrame section.
*Note SFrame version::, for the set of valid values.
Current version is ‘SFRAME_VERSION_1’.
0x03 ‘uint8_t sfp_flags’ Flags (section-wide) for this SFrame section.
*Note SFrame flags::, for the set of valid values.
* Menu:
* SFrame endianness::
* SFrame version::
* SFrame flags::

File: sframe-spec.info, Node: SFrame endianness, Next: SFrame version, Up: SFrame Preamble
2.1.1 SFrame endianness
-----------------------
SFrame sections are stored in the target endianness of the system that
consumes them. The SFrame library (‘libsframe’) can, however, detect
whether to endian-flip an SFrame section at decode time, by inspecting
the ‘sfp_magic’ field in the SFrame header (If it appears as 0xe2de,
endian-flipping is needed).

File: sframe-spec.info, Node: SFrame version, Next: SFrame flags, Prev: SFrame endianness, Up: SFrame Preamble
2.1.2 SFrame version
--------------------
The version of the SFrame format can be determined by inspecting
‘sfp_version’. The following versions are currently valid:
Version Number Description
------------------------------------------------------------------
‘SFRAME_VERSION_1’ 1 First version, obsolete.
‘SFRAME_VERSION_2’ 2 Current version, under development.
This document describes ‘SFRAME_VERSION_2’.

File: sframe-spec.info, Node: SFrame flags, Prev: SFrame version, Up: SFrame Preamble
2.1.3 SFrame flags
------------------
The preamble contains bitflags in its ‘sfp_flags’ field that describe
various section-wide properties.
The following flags are currently defined.
Flag Versions Value Meaning
----------------------------------------------------------------------------
‘SFRAME_F_FDE_SORTED’ All 0x1 Function Descriptor Entries
are sorted on PC.
‘SFRAME_F_FRAME_POINTER’ All 0x2 Functions preserve
frame-pointer.
Further flags may be added in future.

File: sframe-spec.info, Node: SFrame Header, Next: SFrame Function Descriptor Entries, Prev: SFrame Preamble, Up: SFrame section
2.2 SFrame Header
=================
The SFrame header is the first part of an SFrame section. It begins
with the SFrame preamble. All parts of it other than the preamble
(*note SFrame Preamble::) can vary between SFrame file versions. It
contains things that apply to the section as a whole, and offsets to the
various other sub-sections defined in the format. As with the rest of
the SFrame section, all values are stored in the endianness of the
target system.
The two sub-sections tile the SFrame section: each section runs from
the offset given until the start of the next section. An explicit
length is given for the last sub-section, the SFrame Frame Row Entry
(SFrame FRE) sub-section.
typedef struct sframe_header
{
sframe_preamble sfh_preamble;
uint8_t sfh_abi_arch;
int8_t sfh_cfa_fixed_fp_offset;
int8_t sfh_cfa_fixed_ra_offset;
uint8_t sfh_auxhdr_len;
uint32_t sfh_num_fdes;
uint32_t sfh_num_fres;
uint32_t sfh_fre_len;
uint32_t sfh_fdeoff;
uint32_t sfh_freoff;
} ATTRIBUTE_PACKED sframe_header;
Every element of the SFrame header is naturally aligned.
The sub-section offsets, namely ‘sfh_fdeoff’ and ‘sfh_freoff’, in the
SFrame header are relative to the _end_ of the SFrame header; they are
each an offset in bytes into the SFrame section where the SFrame FDE
sub-section and the SFrame FRE sub-section respectively start.
SFrame header allows specifying explicitly the fixed offsets from
CFA, if any, from which FP or RA may be recovered. For example, in
AMD64, the stack offset of the return address is ‘CFA - 8’. Since this
offset is in close vicinity with the CFA in most ABIs,
‘sfh_cfa_fixed_fp_offset’ and ‘sfh_cfa_fixed_ra_offset’ are limited to
signed 8-bit integers.
SFrame format has made some provisions for supporting more
ABIs/architectures in the future. The ‘sframe_header’ structure
provides an unsigned 8-bit integral field to denote the size of an
auxiliary SFrame header. The auxiliary SFrame header follows right
after the ‘sframe_header’ structure. As for the offset calculations,
the _end_ of SFrame header must be the end of the auxiliary SFrame
header, if the latter is present.
Putting it all together:
Offset Name Description
----------------------------------------------------------------------------------------
0x00 ‘sframe_preamble sfh_preamble’ The SFrame preamble.
*Note SFrame Preamble::.
0x04 ‘uint8_t sfh_abi_arch’ The ABI/arch identifier.
*Note SFrame ABI/arch identifier::.
0x05 ‘int8_t sfh_cfa_fixed_fp_offset’ The CFA fixed FP offset, if any.
0x06 ‘int8_t sfh_cfa_fixed_ra_offset’ The CFA fixed RA offset, if any.
0x07 ‘uint8_t sfh_auxhdr_len’ Size in bytes of the auxiliary header
that follows the ‘sframe_header’
structure.
0x08 ‘uint32_t sfh_num_fdes’ The number of SFrame FDEs in the section.
0xc ‘uint32_t sfh_num_fres’ The number of SFrame FREs in the section.
0x10 ‘uint32_t sfh_fre_len’ The length in bytes of the SFrame FRE
sub-section.
0x14 ‘uint32_t sfh_fdeoff’ The offset in bytes of the SFrame FDE
sub-section. This sub-section contains
‘sfh_num_fdes’ number of fixed-length
array elements. The array element is of
type SFrame function desciptor entry,
each providing a high-level function
description for backtracing.
*Note SFrame Function Descriptor Entries::.
0x18 ‘uint32_t sfh_freoff’ The offset in bytes of the SFrame FRE
sub-section, the core of the SFrame
section, which describes the stack trace
information using variable-length array
elements.
*Note SFrame Frame Row Entries::.
* Menu:
* SFrame ABI/arch identifier::

File: sframe-spec.info, Node: SFrame ABI/arch identifier, Up: SFrame Header
2.2.1 SFrame ABI/arch identifier
--------------------------------
SFrame header identifies the ABI/arch of the target system for which the
executable and hence, the stack trace information contained in the
SFrame section, is intended. There are currently three identifiable
ABI/arch values in the format.
ABI/arch Identifier Value Description
---------------------------------------------------------------------
‘SFRAME_ABI_AARCH64_ENDIAN_BIG’ 1 AARCH64 big-endian
‘SFRAME_ABI_AARCH64_ENDIAN_LITTLE’ 2 AARCH64 little-endian
‘SFRAME_ABI_AMD64_ENDIAN_LITTLE’ 3 AMD64 little-endian
The presence of an explicit identification of ABI/arch in SFrame may
allow stack trace generators to make certain ABI-specific decisions.

File: sframe-spec.info, Node: SFrame Function Descriptor Entries, Next: SFrame Frame Row Entries, Prev: SFrame Header, Up: SFrame section
2.3 SFrame FDE
==============
The SFrame Function Descriptor Entry sub-section is a sorted array of
fixed-length SFrame function descriptor entries (SFrame FDEs). Each
SFrame FDE is a packed structure which contains information to describe
a function’s stack trace information at a high-level.
typedef struct sframe_func_desc_entry
{
int32_t sfde_func_start_address;
uint32_t sfde_func_size;
uint32_t sfde_func_start_fre_off;
uint32_t sfde_func_num_fres;
uint8_t sfde_func_info;
uint8_t sfde_func_rep_size;
uint16_t sfde_func_padding2;
} ATTRIBUTE_PACKED sframe_func_desc_entry;
Every element of the SFrame function descriptor entry is naturally
aligned.
‘sfde_func_start_fre_off’ is the offset to the first SFrame FRE for
the function. This offset is relative to the _end of the SFrame FDE_
sub-section (unlike the offsets in the SFrame header, which are relative
to the _end_ of the SFrame header).
‘sfde_func_info’ is the "info word", containing information on the
FRE type and the FDE type for the function *Note The SFrame FDE info
word::.
Following table describes each component of the SFrame FDE structure:
Offset Name Description
------------------------------------------------------------------------------------------
0x00 ‘int32_t sfde_func_start_address’ Signed 32-bit integral field denoting the
virtual memory address of the described
function.
0x04 ‘uint32_t sfde_func_size’ Unsigned 32-bit integral field specifying
the size of the function in bytes.
0x08 ‘uint32_t sfde_func_start_fre_off’ Unsigned 32-bit integral field specifying
the offset in bytes of the function’s
first SFrame FRE in the SFrame section.
0x0c ‘uint32_t sfde_func_num_fres’ Unsigned 32-bit integral field specifying
the total number of SFrame FREs used for
the function.
0x10 ‘uint8_t sfde_func_info’ Unsigned 8-bit integral field specifying
the SFrame FDE info word.
*Note The SFrame FDE info word::.
0x11 ‘uint8_t sfde_func_rep_size’ Unsigned 8-bit integral field specifying
the size of the repetitive code block for
which an SFrame FDE of type
SFRAME_FDE_TYPE_PCMASK is used. For
example, in AMD64, the size of a pltN
entry is 16 bytes.
0x12 ‘uint16_t sfde_func_padding2’ Padding of 2 bytes. Currently unused
bytes.
* Menu:
* The SFrame FDE info word::
* The SFrame FDE types::
* The SFrame FRE types::

File: sframe-spec.info, Node: The SFrame FDE info word, Next: The SFrame FDE types, Up: SFrame Function Descriptor Entries
2.3.1 The SFrame FDE info word
------------------------------
The info word is a bitfield split into three parts. From MSB to LSB:
Bit offset Name Description
----------------------------------------------------------------------------------------
7–6 ‘unused’ Unused bits.
5 ‘pauth_key’ Specify which key is used for signing the return addresses
in the SFrame FDE. Two possible values:
SFRAME_AARCH64_PAUTH_KEY_A (0), or
SFRAME_AARCH64_PAUTH_KEY_B (1).
4 ‘fdetype’ Specify the SFrame FDE type. Two possible values:
SFRAME_FDE_TYPE_PCMASK (1), or
SFRAME_FDE_TYPE_PCINC (0).
*Note The SFrame FDE types::.
0–3 ‘fretype’ Choice of three SFrame FRE types.
*Note The SFrame FRE types::.

File: sframe-spec.info, Node: The SFrame FDE types, Next: The SFrame FRE types, Prev: The SFrame FDE info word, Up: SFrame Function Descriptor Entries
2.3.2 The SFrame FDE types
--------------------------
SFrame format defines two types of FDE entries. The choice of which
SFrame FDE type to use is made based on the instruction patterns in the
relevant program stub.
An SFrame FDE of type ‘SFRAME_FDE_TYPE_PCINC’ is an indication that
the PCs in the FREs should be treated as increments in bytes. This is
used fo the the bulk of the executable code of a program, which contains
instructions with no specific pattern.
In contrast, an SFrame FDE of type ‘SFRAME_FDE_TYPE_PCMASK’ is an
indication that the PCs in the FREs should be treated as masks. This
type is useful for the cases where a small pattern of instructions in a
program stub is used repeatedly for a specific functionality. Typical
usecases are pltN entries and trampolines.
Name of SFrame FDE Value Description
type
---------------------------------------------------------------------------
SFRAME_FDE_TYPE_PCINC 0 Unwinders perform a
(PC >= FRE_START_ADDR) to look up a
matching FRE.
SFRAME_FDE_TYPE_PCMASK 1 Unwinders perform a
(PC % REP_BLOCK_SIZE
>= FRE_START_ADDR) to look up a
matching FRE. REP_BLOCK_SIZE is the
size in bytes of the repeating block of
program instructions.

File: sframe-spec.info, Node: The SFrame FRE types, Prev: The SFrame FDE types, Up: SFrame Function Descriptor Entries
2.3.3 The SFrame FRE types
--------------------------
A real world application can have functions of size big and small.
SFrame format defines three types of SFrame FRE entries to represent the
stack trace information for such a variety of function sizes. These
representations vary in the number of bits needed to encode the start
address offset in the SFrame FRE.
The following constants are defined and used to identify the SFrame
FRE types:
Name Value Description
--------------------------------------------------------------------------
‘SFRAME_FRE_TYPE_ADDR1’ 0 The start address offset (in bytes)
of the SFrame FRE is an unsigned
8-bit value.
‘SFRAME_FRE_TYPE_ADDR2’ 1 The start address offset (in bytes)
of the SFrame FRE is an unsigned
16-bit value.
‘SFRAME_FRE_TYPE_ADDR4’ 2 The start address offset (in bytes)
of the SFrame FRE is an unsigned
32-bit value.
A single function must use the same type of SFrame FRE throughout.
An identifier to reflect the chosen SFrame FRE type is stored in the
*Note The SFrame FDE info word::.

File: sframe-spec.info, Node: SFrame Frame Row Entries, Prev: SFrame Function Descriptor Entries, Up: SFrame section
2.4 SFrame FRE
==============
The SFrame Frame Row Entry sub-section contains the core of the stack
trace information.
An SFrame Frame Row Entry is a self-sufficient record containing
SFrame stack trace information for a range of contiguous addresses,
starting at the specified offset from the start of the function. Each
SFrame Frame Row Entry is followed by S*N bytes, where:
− ‘S’ is the size of the stack frame offset for the FRE, and
− ‘N’ is the number of stack frame offsets in the FRE
The stack offsets, following the FRE, are interpreted in order as
follows:
− The first offset is always used to locate the CFA, by interpreting
it as: CFA = ‘BASE_REG’ + offset1.
− If RA is being tracked, the second offset is always used to locate
the RA, by interpreting it as: RA = CFA + offset2. If RA is _not_
being tracked _and_ FP is being tracked, the second offset will be
used to locate the FP, by interpreting it as: FP = CFA + offset2.
− If both RA and FP are being tracked, the third offset will be used
to locate the FP, by interpreting it as FP = CFA + offset3.
The entities ‘S’, ‘N’ and ‘BASE_REG’ are identified using the SFrame
FRE info word, a.k.a. the ‘sframe_fre_info’ *Note The SFrame FRE info
word::.
Following are the definitions of the allowed SFrame FRE:
typedef struct sframe_frame_row_entry_addr1
{
uint8_t sfre_start_address;
sframe_fre_info sfre_info;
} ATTRIBUTE_PACKED sframe_frame_row_entry_addr1;
typedef struct sframe_frame_row_entry_addr2
{
uint16_t sfre_start_address;
sframe_fre_info sfre_info;
} ATTRIBUTE_PACKED sframe_frame_row_entry_addr2;
typedef struct sframe_frame_row_entry_addr4
{
uint32_t sfre_start_address;
sframe_fre_info sfre_info;
} ATTRIBUTE_PACKED sframe_frame_row_entry_addr4;
For ensuring compactness, SFrame frame row entries are stored
unaligned on disk. Appropriate mechanisms need to be employed, as
necessary, by the serializing and deserializing entities, if unaligned
accesses need to be avoided.
‘sfre_start_address’ is an unsigned 8-bit/16-bit/32-bit integral
field identifies the start address of the range of program counters, for
which the SFrame FRE applies. The value encoded in the
‘sfre_start_address’ field is the offset in bytes of the start address
of the SFrame FRE, from the start address of the function.
Further FRE types may be added in future.
* Menu:
* The SFrame FRE info word::

File: sframe-spec.info, Node: The SFrame FRE info word, Up: SFrame Frame Row Entries
2.4.1 The SFrame FRE info word
------------------------------
The SFrame FRE info word is a bitfield split into four parts. From MSB
to LSB:
Bit offset Name Description
-------------------------------------------------------------------------------------
7 ‘fre_mangled_ra_p’ Indicate whether the return address is
mangled with any authorization bits (signed
RA).
5-6 ‘fre_offset_size’ Size of stack offsets in bytes. Valid values
are:
SFRAME_FRE_OFFSET_1B,
SFRAME_FRE_OFFSET_2B, and
SFRAME_FRE_OFFSET_4B.
1-4 ‘fre_offset_count’ A value of upto 3 is allowed to track all
three of CFA, FP and RA.
0 ‘fre_cfa_base_reg_id’ Distinguish between SP or FP based CFA
recovery.
Name Value Description
--------------------------------------------------------------------------------
‘SFRAME_FRE_OFFSET_1B’ 0 All stack offsets following the fixed-length
FRE structure are 1 byte long.
‘SFRAME_FRE_OFFSET_2B’ 1 All stack offsets following the fixed-length
FRE structure are 2 bytes long.
‘SFRAME_FRE_OFFSET_4B’ 2 All stack offsets following the fixed-length
FRE structure are 4 bytes long.

File: sframe-spec.info, Node: Index, Prev: SFrame section, Up: Top
Index
*****
[index]
* Menu:
* Changes from Version 1 to Version 2: Changes from Version 1 to Version 2.
(line 6)
* endianness: SFrame endianness. (line 6)
* Introduction: Introduction. (line 6)
* Overview: Overview. (line 6)
* SFrame ABI/arch identifier: SFrame ABI/arch identifier.
(line 6)
* SFrame FDE: SFrame Function Descriptor Entries.
(line 6)
* SFrame flags: SFrame flags. (line 6)
* SFrame FRE: SFrame Frame Row Entries.
(line 6)
* SFrame header: SFrame Header. (line 6)
* SFrame preamble: SFrame Preamble. (line 6)
* SFrame section: SFrame section. (line 6)
* SFrame versions: SFrame version. (line 9)
* SFRAME_ABI_AARCH64_ENDIAN_BIG: SFrame ABI/arch identifier.
(line 13)
* SFRAME_ABI_AARCH64_ENDIAN_LITTLE: SFrame ABI/arch identifier.
(line 16)
* SFRAME_ABI_AMD64_ENDIAN_LITTLE: SFrame ABI/arch identifier.
(line 18)
* SFRAME_FDE_TYPE_PCINC: The SFrame FDE types. (line 6)
* SFRAME_FDE_TYPE_PCMASK: The SFrame FDE types. (line 6)
* SFRAME_FRE_OFFSET_1B: The SFrame FRE info word.
(line 30)
* SFRAME_FRE_OFFSET_2B: The SFrame FRE info word.
(line 34)
* SFRAME_FRE_OFFSET_4B: The SFrame FRE info word.
(line 37)
* SFRAME_FRE_TYPE_ADDR1: The SFrame FRE types. (line 17)
* SFRAME_FRE_TYPE_ADDR2: The SFrame FRE types. (line 22)
* SFRAME_FRE_TYPE_ADDR4: The SFrame FRE types. (line 26)
* SFRAME_F_FDE_SORTED: SFrame flags. (line 11)
* SFRAME_F_FRAME_POINTER: SFrame flags. (line 14)
* SFRAME_MAGIC: SFrame Preamble. (line 24)
* SFRAME_VERSION_1: SFrame version. (line 9)
* The SFrame FDE info word: SFrame Function Descriptor Entries.
(line 73)
* The SFrame FRE info word: SFrame Frame Row Entries.
(line 69)

Tag Table:
Node: Top569
Node: Introduction1159
Node: Overview1345
Node: Changes from Version 1 to Version 22932
Node: SFrame section3709
Node: SFrame Preamble4185
Node: SFrame endianness5624
Node: SFrame version6088
Node: SFrame flags6664
Node: SFrame Header7396
Node: SFrame ABI/arch identifier12592
Node: SFrame Function Descriptor Entries13627
Node: The SFrame FDE info word17329
Node: The SFrame FDE types18504
Node: The SFrame FRE types20233
Node: SFrame Frame Row Entries21777
Node: The SFrame FRE info word24470
Node: Index26480

End Tag Table

Local Variables:
coding: utf-8
End:
Reference in a new issue Copy permalink